Installation

STEP 1 Acclimatization and choice of glue

We recommend acclimatizing wood panels to the new environment for 1-2 days, keeping them packed. Room temperature must be above 17°C and 35 - 65 % relative humidity must prevail. This will ensure that the panels get used to the climate of the new room. Use elastic polymer-based mounting adhesive to glue the panels to the wall. Do not use dispersion-based (water based) adhesives, as this can lead to deformation of the panels!

STEP 2 Wall preparation

Make sure that the surface on which you will install the panels is relatively flat. The surface must also be clean, dry (a maximum residual moisture of 5 %) and free of dust. The product is intended for use in rooms with relative humidity from 35% to 65%. The panels are made of natural wood, that is why use them in high humidity places is not recommended.

STEP 3 Fixing the panels to the wall

Use polymer-based flexible mounting adhesive to glue the panels to the wall. Do not use dispersion-based (water based) adhesives, as this can lead to deformation of the panels. When choosing an adhesive, follow the adhesive manufacturer’s instructions about the surface onto which you plan to glue the panels, as well as the required amount of adhesive. Apply the glue as instructed. Make sure that the glue is also applied to the corners of the panels.

STEP 4 What to consider when assembling the panels

Start assembling the panels from the bottom up, leaving 3-5 mm gaps between the floor and walls. Use a spirit level for the job. Finish laying the panels with a gap of 3-5 mm from the ceiling. The decorative (facade) side of OZO model panels is structured, ribbed! Pay attention to it!

STEP 5 Laying of panels

You can arrange the panels on the wall inyour own unique pattern (horizontally, vertically, diagonally, or in any pattern ofyour choice) or as shown in the diagram. If the panels are of the same width (pic. A). If the panels are of different widths (pic. B).When starting a new row, we recommen dusing the previous (same width) row cuttings. In the process of laying, for models with different thicknesses or materials (acoustic), lay them alternately or in your own unique pattern.

STEP 6 Sawing of panels

Wall panels can be sawn in several ways. Make markings on the panel to know where to saw. Saw the panel with a hand saw, circular saw, or jigsaw. Before sawing, read the operating instructions for the saw of choice. Since the panels are made of natural wood, some panels may bend slightly due to moisture and tension in the wood. If the bending of the panel does not allow it to be attached to the wall, cut it in half and place it according to the general pattern, this will not change the overall appearance of the wall in any way.

STEP 8 Outer corner

Outer angle could be made by applying panel in 45-degree angle (pic. A) or by using decorative moldings. (pic. B).

STEP 8 The inner corner

The inner corner is created by sawing the panel at a 45-degree angle.

FAQ

Usage

filter-plus Where can I use the WLD lamps?

Lamp has IP-20 class, their use is allowed only in interior. WLD lamps is not allowed to use in rooms with high humidity.

filter-plus How do I clean it?

You can use a static brush.

Installation

filter-plus Where can I find the manual instruction?

Press on link bellow.

filter-plus Can I install lamps by myself?

We strictly recommend to hire a specialist, because installing lamps requires electrical knowledge.

filter-plus Is litgh bulb included in the package?

FOR PENDANT LAMPS - No, please refer to description to find what lightbulbs can be used with each pendant lamp!

FOR WALL LAMPS - Yes, light bulb is included!

Order processing

filter-plus What payment methods are available?

You can pay with a VISA or Mastercard bank card, as well as with the most popular banklink payment methods.

filter-plus When will I get my order?

The goods should arrive within 1 week Europe and 1-2 days in Latvia. The deliveries in Europe may in some cases take more than one week.

filter-plus How will I know when my order is shipped?

You will receive an email with tracking details once your parcel has left the warehouse.

filter-plus How do I cancel/edit my order?

To cancel or edit your order please submit a request, and our WWD Team will get back to you as soon as possible. After dispatch, delivery options and changes can be managed according to the instructions in carrier's preadvise email/text message. Note: Cancellation or Item Change is possible only for orders that have not been dispatched.

Delivery time

filter-plus What is the lead time for orders?

We ship the goods immediately upon receipt of payment. Delivery time depends on your location, but you will be able to track your shipment by the carrier's tracking number.

Damaged shipment

filter-plus If you have received damaged order?

Do not worry. All shipments are insured. 1. If possible make note on delivery manifest about damaged parcels. 2. Take a pictures of damaged boxes, items and delivery label. Send those photos to us as soon as possible. Claims for damaged shipments are accepted within five days of delivery.

filter-plus What happens later?

We will review the pictures and get back to you. Depending on the situation, we will offer to send a replacement product or return the money.